Cable System

Medium Voltage

MV-CONNEX Joint, size 3 up to 52 kV

  • Max. system voltage Um (kV) 52
  • Design straight
  • Nominal current IN (A) 1250
  • Size 3
  • Max. system voltage Um (kV) 52
  • Design straight
  • Nominal current IN (A) 1250
Product Range
Medium Voltage
Order

CONNEX Separable Connector, Size 3 / 3-S, up to 52 kV

  • Size 3, 3-S Max.
  • System voltage Um (kV) 52
  • Cable specification any standard
  • Capacitive voltage tap with or without
  • For cable cross section (mm2 ) 35 – 800 Max.
  • Diameter over PE/XLPE insulation max. Ø (mm) 46,0
Product Range
Medium Voltage
Order

HIGH VOLTAGE (HV)

ESS

ESS (Silicone outdoor termination)

  • Wet type (liquid insulation, polybuthene type)
  • Applicable for 72,5 up to 500 kV
  • Possible cable cross sections from 150 up to 2’000 mm2
  • 87-103 mm maximum cable diameter over peeled insulation
  • Self-supporting properties
  • Glass fibre reinforced tube with silicon sheds
  • Silicone stress cone
  • Vertical installation (+/- 30°)
  • According to IEC 60840 (Testing) & IEC 60815 (Pollution level)
Product Range
HIGH VOLTAGE
Order

CONNEX

CONNEX (GIS and Transformer termination)

  • Pluggable Dry Type type (NO liquid insulation)
  • Applicable for 72,5 up to 500 kV
  • Possible cable cross sections from 240 up to 2500 mm2
  • No Gas or Oil work on GIS and Transformer
  • Reduce installation time
  • Silicone stress cone
  • Vertical, horizontal or head-up installation
  • According to IEC 60840 (Testing) & IEC 60137, EN 50299
  • (Transformer) & IEC 62271 , IEC 60859 (GIS)
Product Range
HIGH VOLTAGE
Order

MSA 

MSA (One piece silicone slip-on joint)

  • One piece construction
  • Applicable for 72,5 up to 500kV
  • Silicone body and silicone stress cone
  • Possible cable cross sections from 240 up to 2500 mm2
  • 150 mm maximum cable diameter over peeled insulation
  • Any kind of screen treatment
  • For all polymeric insulated cables (XLPE, EPR)
  • Water blocking by Filling Compound
  • Fibre-glass reinforced PP Housing
  • According to IEC 60840 (Testing)
Product Range
HIGH VOLTAGE
Order

EXTRA HIGH VOLTAGE (EHV)

ESS 550 kV

  • Max. system voltage Um (kV) 550
  • Type Termination oil insulated, silicone composite insulator
  • Applicable standards IEC 62067
  • Rated lightning impulse withstand voltage BIL (kV) 1550
  • Conductor cross section (mm2) 630 – 2500
  • Diameter over cable insulation – prepared (mm) 83 – 145
  • Max. diameter over outer cable sheath (mm) 201
  • Minimum creepage distance (mm) 18805
Product Range
EXTRA HIGH VOLTAGE
Order

HV CONNEX Size 9 550kV

Application:

  • Pluggable separable connector for all XLPE cables

Features:

  • The separable connector is installed without any gas- and oilwork at the transformer or GIS
  • Considerably reduced installation time and safe installation
  • Horizontal, vertical and angeled versions for connection to GIS and tranformers
  • Rapid separation and change of cable and equipment possible
  • Touchproof, submersible, and maintenance-free
  • Routine-tested from factory
Product Range
EXTRA HIGH VOLTAGE
Order

SPECIAL PRODUCT

HV-CONNEX Elbow Joint, Size 6

HV-CONNEX Elbow Joint, Size 6

Application

  • Pluggable connection of two cable runs arranged at right angle
  • In combination with CONNEX bushings in vertically suited for temporarily supplying a facility

Features

  • Fast installation thanks to preassembly
  • Combination of different conductor materials
  • Connects a vast range of cable cross-sections
  • Different sizes can be combined on request
  • Metal clad
  • Fully insulated
  • High short-circuit strength
  • Maintance-free
  • Maintenance-free gas density monitor (manometer) with remote monitoring option

Bursting disc

  • Sockets are sealed with plastic covers.
  • Voltage-proof dummy plugs to be ordered separately.
Product Range
SPECIAL PRODUCT
Order

CONNEX Connection Joint 170kV 

CONNEX Connection Joint 170 kV (EPOXY Joint 170 kV)

Application:

  • Pluggable connection between two cable runs
  • Temporary use at testing points
  • Interim solution for line construction

Features:

  • For temporary or permanent use
  • Fast assembly without any gas or oil work
  • Safe to touch, submersible, and maintenance-free
  • Certified for offshore use
  • Combination of different conductor materials
  • Connects a vast range of cable cross-sections
  • Special type available for underground
Product Range
SPECIAL PRODUCT
Order

CONNEX T-Joint, Size 6, 170 kV

CONNEX T-Joint, Size 6, 170 kV (T-Joint 170kV)

Application:

  • Branching from one cable of two cables
  • Branching from an overhead line to cables
  • If one connection point remains unused, it is simply sealed with a dummy plug of high electric strength

Features:

  • Fast installation thanks to preassembly
  • Combination of different conductor materials
  • Connects a vast range of cable cross-sections
  • Different sizes can be combined on request
  • Metal clad
  • Fully insulated
  • High short-circuit strength
  • Maintance-free
  • Maintenance-free gas density monitor (manometer) with remote monitoring option
  • Sockets are sealed with plastic covers.
  • Voltage-proof dummy plugs to be ordered separately.
Product Range
SPECIAL PRODUCT
Order

We Provide The Best Service In Power Distributions

Add a line that tells users how easily they can get in touch with you
Contact Us Today